Product information

Debonder/remover of instant (cyanoacrylate) adhesives used to disrupt cured instant adhesive to allow the mechanical release of the bonded joint, removal of adhesive stains from objects, etc. The disrupter cannot be used on materials that are not resistant to organic solvents (polystyrene foam, some synthetic fabrics, etc.).

Use: before use, test that the remover does not attack the material from which you want to remove the adhesive.

• Fixed objects: apply the debonder to the adhesive to be removed. After 5 minutes of application, the adhesive residue can be scraped off or wiped off in a circular motion with a soft cloth.
• Fabrics: place a clean cloth under the spot to be cleaned, which may soak up any excess adhesive; apply adhesive to the spot and leave for 5 minutes. Carefully remove the loose adhesive, repeating the procedure several times as necessary.
• After removing the adhesive, wash the surface of the object/fabric with lukewarm water.

Suitable for: instant adhesives applied to organic solvent-resistant materials.

Not suitable for: polystyrene foam and other materials that are not resistant to organic solvents.

Storing: in a tightly closed container, in a cool, dry and dark place (at +5 °C to +25 °C). Do not expose to temperatures below +2 °C.

Shelf life: under proper storage conditions, we guarantee a shelf life of 1 year in the unopened original packaging, while maintaining the above product properties.

The product contains substances classified as dangerous within the meaning of Regulation (EC) No 1272/2008. For detailed information see the section "Downloads".

Safety information

The product contains substances classified as dangerous within the meaning of Regulation (EC) No. 1272/2008.

Warning
Contains: 1-methoxy-2-propanol
May cause drowsiness or dizziness.
Keep out of reach of children. Avoid breathing mist/vapours/spray. Use only outdoors or in a well-ventilated area. Store locked up.

UFI: E8JW-VM9W-N10G-7MGM