|
|
VIBE is a high performance 3D aerobatic biplane park-flyer made of virtually unbreakable EPP foam for 350-500 W brushless motors. A couple of hours with a bottle of cyano are all you need to finish this model capable of classic pattern aerobatics as well as all 3D stunts! VIBE is not just for skilled pilots; on small rates she could be flown by any Sunday flyer who already knows how to do a loop, stall turn and roll. And if something (or your fingers on sticks) goes wrong, thanks to the low all-up weight there usually is not much damage - and even if so, the EPP foam is so easy to repair!
The all-in-one wing EPP foam wing with symmetrical wing section is reinforced with a pair of carbon spars; the pre-cut bays are ready for your servos in the lower wing, indeed. The plywood reinforced cabane strut is an integral part of the fuselage; the wing struts are of carbon reinforced EPP. The horizontal part of the fuselage is thoroughly reinforced by a web of carbon spars; the large area vertical part of the fuselage makes the knife edge easy. The plywood firewall is anchored to the foam fuselage with carbon spars as well; the pre-cut bays are ready to accommodate the elevator a rudder servos. The empennage is also made of the carbon reinforced EPP foam. The control surface linkage is made of 3D printed horns, plastic clevises and short carbon or steel push rods. The carbon main undercarriage with lightweight foam wheels and EPP pants is secured by 2 bolts to a fibreglass plate and holders. The steerable tail wheel assembly consists of 3D printed bracket and lightweight foam wheel.
You will need at least a four channel RC set; a computer radio featuring dual and exponential rates is strongly recommended.
VIBE of a Sunday flyer would work nicely with analog micro servos with metal gears like KAVAN GO-13MG, Hitec HS-65MG etc. If you are serious about aerobatics even a little bit, you should go for high speed & torque digital servos like KAVAN GO-1013MG, Hitec HS-5065MG or similar.
We recommend KAVAN PRO 3536-1000, Model Motors AXI 2814/16 V2 or similar brushless motors with the APC 11x4.7SF propeller if 3S LiPo battery was used or the APC 10x4.7SF with 4S LiPo.
At least 40A speed controller featuring a powerful switching BEC should be used - especially when high speed & torque digital servos are installed - like the KAVAN PRO-40SB or KAVAN R-50SB Plus.
You can use 3S or 4S LiPo 1300-1800 mAh flight pack, at least 40C.
Designed and manufactured in the Czech Republic.
The kit contents: printed parts of fuselage, wings, tail and wheel pants cut of EPP foam, plywood firewall, carbon spars, 3D printed plastic parts, horns, clevises, push rods and other small accessories, carbon undercarriage with light foam wheels, illustrated step-by-step instruction manual.
Equipments required
KAV30.0156C Název zboží: Combo set KAVAN C3536-1250 + KAVAN R-50SB Plus Price: 59,54€ Delivery status: in stock at supplier Combo set of BLS motor with 50A ESC for model aircraft: glider 1600g, trainer 1500g, acro 1300g, 3D 1050g, KV1250 rpm per V, power supply Lixx 3-4s, shaft 4.0 mm. | |
KAV30.0152C Název zboží: Combo set KAVAN C3536-1000 + KAVAN R-40SB Plus Price: 51,21€ Delivery status: contact us Combo set of BLS motor with 40A ESC for model aircraft: glider 1700g, trainer 1600g, acro 1330g, 3D 1050g, KV1000 rpm per V, power supply Lixx 3-4s, shaft 4.0 mm. | |
KAV30.2018 Název zboží: KAVAN Brushless Motor PRO 3536-1000 Price: 45,42€ Delivery status: in stock at supplier Outrunner brushless electric motor for model aeroplanes: glider 1700g, trainer 1600g, acro 1330g, 3D 1050g, KV1000 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2814-1000. | |
KAV30.2019 Název zboží: KAVAN Brushless Motor PRO 3536-1150 Price: 45,42€ Delivery status: in stock at supplier Outrunner brushless electric motor for model aeroplanes: glider 1600g, trainer 1500g, acro 1300g, 3D 1050g, KV1150 RPM/V, input voltage 3-4S Lixx. 5.0mm shaft. Alternative designation based on the stator dimension: 2814-1150. | |
1HI3178 Název zboží: HS-5065 MG DIGITAL Price: 38,71€ Delivery status: in stock at supplier Strong digital microservo 12g Fully programmable digital pico servo with metal gears for indoor electric planes,throwers and micro helicopters. 1xBB. Move 1.8 kg / cm, speed 0,11s / 60st at 4.8 V. The programmable. | |
KAV32.31020 Název zboží: KAVAN PRO-40SB brushless ESC 40A Price: 37,88€ Delivery status: in stock Programmable brushless ESC for aircraft/helicopter models. Continuous current 40A (peak 60A), 3–6 LiPo cells power, switch-mode BEC 5.2V, 6V, 7.4V/8A. Weight: 44g; dimensions: 47x28x14mm. | |
1HI31800 Název zboží: HS-5070 MH HiVolt DIGITAL Price: 37,46€ Delivery status: in stock at supplier Our new strong and speedy digital HS-5070MH possess the performance qualities necessary for the new class of 42-48 inch performance 3D aircraft and 450-size helicopters. The programmable HS-5070MH delivers an impressive 53 oz.-in. of torque at 7.4 volts. Fast, forceful, fantastic! We Are Hitec! | |
1HI3033 Název zboží: HS-70MG Price: 32,88€ Delivery status: in stock at supplier Our strong and speedy analog HS-70MG possess the performance qualities necessary for the new class of 42-48 inch performance 3D aircraft and 450-size helicopters. Featuring Hitec’s durable metal gears, cored motors, top ball bearings and Generation 1 circuitry, these new additions to our vast servo family will have all your planes and helis flying with remarkable precision and power. Fast, forceful, fantastic! We Are Hitec! | |
1HI3022 Název zboží: HS-65MG Price: 32,46€ Delivery status: in stock Strong microservo 12g with metal gears for mini helicopters,small electric plane models and RC cars 1:18 pr :1xBB, torque 1,8 kg/cm, speed 0,14s/60st při 4,8 V. | |
KAV30.0252 Název zboží: KAVAN Brushless motor C3536-1000 Price: 29,96€ Delivery status: contact us Brushless outrunner motor for model aircraft: glider 1700g, trainer 1600g, acro 1330g, 3D 1050g, KV1000 rpm per V, power supply Lixx 2-4s, shaft 4.0 mm. | |
KAV30.0256 Název zboží: KAVAN Brushless motor C3536-1250 Price: 29,96€ Delivery status: in stock Brushless outrunner motor for model aircraft: glider 1600g, trainer 1500g, acro 1300g, 3D 1050g, KV1250 rpm per V, power supply Lixx 2-4s, shaft 4.0 mm. | |
KAV33.6007 Název zboží: KAVAN Li-Po 1800mAh/11,1V 40/80C 20,0Wh Price: 27,04€ Delivery status: in stock at supplier KAVAN LiPo high performance power pack 40/80C, charge rate up to 2C. Three-cell pack 3s1p 11.1V 1800 mAh, dimensions: 96x31.5x25mm, weight: 140g, JST-XH balance connector. | |
KAV33.7122 Název zboží: KAVAN Li-Po 1800mAh/11,1V 30/60C Air pack Price: 23,29€ Delivery status: in stock at supplier KAVAN LiPo power pack 30/60C, charge rate up to 2C. Three-cell pack 3s1p 11.1V 1800 mAh, dimensions: 105x36x19, weight: 125g, JST-XH balance connector. | |
KAV20.1013MG Název zboží: GO-1013MG (0.13s/60°, 3.8kg.cm) Price: 22,88€ Delivery status: in stock at supplier High torque programmable digital pico servo 13g with titanium gear and input voltage range 4.8-6.0V, 2xBB, ideal for small model aircraft, 1:14-1:24 RC cars, 400-450 size helis etc. Torque 3.0kg.cm, speed 0.15s/60° at 4.8V, torque 3.8kg.cm, speed 0.12s/60° at 6.0V. Aluminium middle case heatsink for perfect cooling under high load. | |
KAV33.6005 Název zboží: KAVAN Li-Po 1300mAh/11,1V 40/80C 14,4Wh Price: 20,79€ Delivery status: in stock at supplier KAVAN LiPo high performance power pack 40/80C, charge rate up to 2C. Three-cell pack 3s1p 11.1V 1300 mAh, dimensions: 72x35x20mm, weight: 106g, JST-XH balance connector. | |
KAV20.013 Název zboží: GO-13MG servo 13g (0.12s/60°, 2.8kg.cm) Price: 12,04€ Delivery status: in stock Powerful 13g micro servo with metal gears and 1 ball bearing for small electrolytes and gliders. 1xBB, draft 2,0 kg / cm, speed 0,14s / 60st at 4,8 V, dimensions 23,5x12,0x28,7 mm, power supply 4,8-6V. |