|
|
Electric sailplane for the sports and leisure flyers.
A nice looking performance glider that likes to fly fast and perform aerobatics. Nevertheless its lightness and profile make it a model that is equally at home riding the thermals.
Designed for those of you who are looking for a good multipurpose electric glider.
The model is designed and manufactured in Czech Republic.
echnical specification:
|
|
|
|
|
|
|
|
Recommended RC equipment:
Servos: 2x micro servos for ailerons ( Hitec HS 82MG )
1x slim servo for elevator ( Dymond D60 )
1x micro servo for rudder ( Hitec HS 82MG )
Motor: AXI 2826/8 V2 LONG
Controller: 60A -80A ( JETI SPIN 66 )
Spinner: ø 42mm - 02042058K
Propeller: 13/8" CAMcarbon (aero-naut)
Accu: 3S LiPol 2,7-3,2Ah
Key features:
- Light fuselage moulded in white tinted epoxy fiberglass
- Two-piece wing foam core balsa sheeted and covered with Oracover®. Ailerons ready.
- Tailplanes are made in a balsa framework and covered with Oracover®
- Top quality accessories
- Complete assembly manual with step by step illustrations
Equipments required
JSP-66 Name: SPIN 66 PRO Price: 127,10€ Delivery status: in stock SPIN pro controller include a new type of voltage stabilizer for receiver and servos, the so called switching BEC with an output voltage of 5.5 V. The use of this feature opens the way to the use of BEC for models operating at higher voltages. A significant factor is that the BEC circuit maintains its full current capability right up to the maximum voltage. | |
3EL105611V2L Name: AXI 2826/8 V2 LONG střídavý motor Price: 118,71€ Delivery status: in stock Ø35m x 57.5mm, RPM 1130/1V, weight 187g. Brushless outrunner new generation of extended tapered front edge for easy installation in gliders. For hotliner to 2000 g, gliders up to 2500 g, 2-3s LiPo power, shaft 5 mm, regulator 60-70A. | |
02098-PO Name: Transport bags for Twister Price: 62,00€ Delivery status: in stock Bags for wings, elevator and rudder. | |
2723 Name: Accu LiPol Xpower 3200-3S ECO 25C Price: 44,58€ Delivery status: in stock at supplier 3200-3S ECO-S (11,1V) 140x42x21 mm 270 g Max. current load: 25C Charging current up to 4C. Balance connector type JST-XH. | |
020D1816 Name: Servo DYMOND D60/TOPMODEL 1816 Price: 34,96€ Delivery status: in stock Slim Servo (9 g) nylon gear. The thickness of only 9 mm allows installation into the wings with a very slim profile. Supply voltage 3.6 to 8.4 V allows in addition to the normal supply also use 1 or 2 LiPo. Notice: for elevator | |
02098-7 Name: Twister stickers Price: 24,50€ Delivery status: in stock Stickers sawed with using a plotter on transfer film for Twister model. | |
1HI3042-1x Name: HS-82 MG Bulk 1pc Price: 23,10€ (recommended quantity: 3 pieces) Delivery status: in stock Unpacked fast microservo 19g with metal gears for small electric planes and sailplanes. Torque 2,6 kg/cm, speed 0,11s/60st in 4,8 V Notice: for ailerons & rudder | |
02042058K Name: Alu precision spinners 42/5,0/8 Price: 14,50€ Delivery status: in stock Spinner ø 42/5 mm, for blade root width 8 mm. | |
723957 Name: CAM CARBON 13x8" Z, 33x20cm Price: 9,60€ Delivery status: in stock the width of the root 8mm for M3 screw, to 12.000 rev / min | |
UHU5146 Name: UHU-Por 50ml Price: 4,54€ Delivery status: in stock Notice: for gluing the servo covers | |
0167823-0,25 Name: Velcro fastener width 5cm; length 25cm Price: 1,80€ Delivery status: in stock self-adhesive Velcro with high-quality acrylic glue, both parts. Price per 25cm. Notice: for fixing the battery | |
0123456789 Name: digit sticker Price: 1,40€ Delivery status: in stock Suitable for describing servoconnectors. Digit height is 5mm. | |
0123456789BW Name: Digits (stickers) for labeling the connectors (Black/white) Price: 1,40€ Delivery status: in stock Suitable for describing the servo connectors. Height of digits 5 mm. | |
0123456789RW Name: Digits (stickers) for labeling the connectors (Red/white) Price: 1,40€ Delivery status: in stock Suitable for describing the servo connectors. Height of digits 5 mm. | |
020CGSTICK Name: Center of gravity mark Price: 1,20€ Delivery status: in stock 6pcs. Ø14mm, 8Pcs. Ø10mm. | |
8GR3009 Name: Servo Cable Twisted Thick JR 0.25mm2 Price: 1,04€ Delivery status: in stock Twisted Servocable (three-row) 0,25mm². Price per common meter. 1 m Weight 13 grams. Notice: ~1,4m | |
9001 Name: Thermo-Shrinkable insulation Ø1,6mm (1m) Price: 0,85€ Delivery status: in stock For isolation of soldered joints of thin cables Ø1,6mm Price per 1 m. Notice: ~0,3m | |
020M3250 Name: Tool for easy insertion of the motor into the fuselage M3x250mm 2 pcs Price: 0,48€ Delivery status: in stock threaded rod M3 x 250mm, 2 pcs |
Spare parts
02098-2ARF Name: Twister 1,84 Wings ARF Price: 179,00€ Delivery status: in stock Part of the wing is small accessories for installation of servos. Covered Oracover® | |
02025ARC Name: Nike EVO (uncovered kit - ready to cover) Price: 174,00€ Delivery status: in stock Hotliner. Wingspan 1.7 m. | |
02098-2ARC Name: Twister 1,84 Wings (uncovered - ready to cover) Price: 135,00€ Delivery status: in stock Part of the wing is small accessories for installation of servos. Not covered. | |
02098-1 Name: Fuselage Twister Price: 65,00€ Delivery status: in stock fiberglass gelcoated, length 990m. | |
02098-3ARF Name: Twister elevator ARF Price: 26,40€ Delivery status: in stock | |
02098-3ARC Name: Twister elevator (uncovered - ready to cover) Price: 21,00€ Delivery status: in stock | |
02098-4ARF Name: Twister rudder ARF Price: 18,10€ Delivery status: in stock | |
02098-4ARC Name: Twister rudder (uncovered - ready to cover) Price: 15,30€ Delivery status: in stock | |
02098-6 Name: Canopy Twister Price: 13,00€ Delivery status: in stock fiberglass gelcoated. | |
TAPE12 Name: Set of adhesive tapes for ailerons and flaps 5 m Price: 4,80€ Delivery status: in stock Set of adhesive tapes for ailerons and flaps. Length 5 m. | |
02098-1C Name: Motor mount ø 41,1mm Twister, Nike Price: 2,60€ Delivery status: in stock CNC cut fiberglass Ø41,1 x 3 mm, eg for Axi 28xx V2 Long | |
05028 Name: Wing servo mounts 13 mm (2 pairs) Price: 2,60€ Delivery status: in stock Polyurethan 13 mm, delivered in double pairs. | |
05019 Name: Plastic servo covers Price: 2,15€ Delivery status: in stock For micro–mini servo, ø 57 mm. Notice: used previously | |
050191 Name: Plastic servo covers Ø 59mm Price: 2,15€ Delivery status: in stock For micro–mini servo, material:0,5mm, 1 pair (right, left) | |
02098-4-3 Name: Steven Twister Price: 1,60€ Delivery status: in stock material: balsa 5mm | |
02025-3S.1 Name: Anti-slip mat of horizontal stabilizer (Nike EVO, Twister...) 2pcs Price: 1,52€ Delivery status: in stock Self-adhesive anti-slip mat for elevators: Nike EVO, Twister, Super Easy, Dora, Parada, Chimera, Murena. Material: sandpaper 800, size 56x17mm. Package content: 2pcs. | |
02098-24 Name: Twister wing joiner Price: 1,50€ Delivery status: in stock steel ∅6 x 170 mm | |
02025-3S Name: Floating elevator bed small Price: 1,40€ Delivery status: in stock Plastic pressing for floating elevator models Nike EVO, Twister, Dora, Parada, Chimera, Murena, Super Easy, Super Easy REF. | |
05070 Name: Fiberglass control horn Linea Price: 0,60€ Delivery status: in stock Fiberglass 1,5mm Notice: for ailerons and rudder |
Tuning parts
02098-6C Name: Canopy Twister (CARBON) Price: 17,50€ Delivery status: in stock |