The Q80-M is rised to an important player in Hacker Motor segment. Ideal for scale models to ~ 17kg (like Piper, SopwithPup...), the motor makes a good figure.
The new Propadapter with 30mm bolt circle and 4 x M5 screws transmits the high torque of Q80 perfectly to the Prop.
Technical Data:
Powerrange |
|
max. 4500W (15 sec.) |
Idle current bei 8,4V |
|
1,0A |
Resistance |
|
0,021 Ohm |
Kv |
|
135 |
Weight ~ |
|
1035g |
Diameter |
|
89 mm |
Lenght (Backmount - Prop) |
|
80 mm |
Pole |
|
28 |
recommend ESC |
|
MasterSpin 170 OPTO |
recommend Timing |
|
25-30° |
Shaft |
|
10mm |
Specifiactions |
max. power range [W] (max.15 sec.) |
4500 |
Poles |
28 |
Turns |
11 |
Idle current (I0) at 8.4V [A] |
1,0 |
Internal resistance (Ri) [Ohm] |
0,021 |
Recommended timing [°] |
25 - 30 |
Switching Frequenzy [kHz] |
8 |
Controller recommendation [A] (depending on setup) |
140 - 300 |
Idle speed per volt (kv) |
135 |
Dimensions and weight |
Weight [g] |
1035 |
Length [mm]/[in] |
80 |
Outer diameter [mm]/[in] |
89 |
Delivery contents |
Prop Adapter |
Ja |
Mounting cross |
Ja |
Gold plug mm (recommended) |
5,5 - 8 |
Backmount mountable |
Ja |
Front mountable |
Nein |