Product description and features
With the Q150-M, we are now bringing an engine from our industrial sector into model making. The innovative design and the efficient engine geometry are guarantors for the enormous performance and the outstanding Performance. This high-end engine is completely handmade and constantly undergoes the most precise quality controls. "Made in Germany" and industrial quality stand for the highest standards and quality. The new prop driver with a 34mm pitch circle and 6 x M5 screws transfers the high torque of the Q150 perfectly to the prop.
Ideal for 3D/aerobatic models with a weight of up to ~25kg, but the motor also cuts a fine figure in scale models up to ~35kg.
Accessories
You can find suitable controllers, batteries and a suitable air screw in the Accessories tab.
Scope of delivery
Q150-4M-V2 Kv 125, prop driver and instructions.
Drive recommendation
Q150-4M-V2 Kv 125 |
item no.: 10107983 |
Propeller |
SEP 34x16 |
LiPo |
12S |
Voltage [V] |
46,0 |
Current [A] |
210 |
Power [W] |
9660 |
RPM |
5600 |
Controller [A] |
220-300 |
Timing [°] |
25 |
Antriebsvorschlag |
Propeller |
36x14 |
Specifiactions |
max. power range [W] (max.15 sec.) |
12000 |
Poles |
42 |
Turns |
4 |
Idle current (I0) at 8.4V [A] |
3,4 |
Internal resistance (Ri) [Ohm] |
0.004 |
RPM max. |
8000 |
Recommended timing [°] |
25 |
Switching Frequenzy [kHz] |
8 |
Controller recommendation [A] (depending on setup) |
220-300 |
Idle speed per volt (kv) |
125 |
max. current [A] |
240 |
Dimensions and weight |
Weight [g] |
2380 |
Length [mm]/[in] |
80 |
Diameter [mm]/[in] |
150 |
Outer diameter [mm]/[in] |
150 |
Delivery contents |
Prop Adapter |
yes |
Mounting cross |
no |
Gold plug mm (soldered) |
no |
Gold plug mm (recommended) |
8 |
Backmount mountable |
yes |
Front mountable |
no |