cart
download
|
| ||||||||||||||||||||||||||
Scale model of the famous sailplane.
The wings are equipped with air-brakes but also with camber flaps. These flaps have a longer length compared to reality and are divided into 2 parts. Thus, it is possible to use these 2 parts, together, like gigantic ailerons but also as camber flaps. This makes possible to make the Swift even more general-purpose and powerful in aerobatic.
The model is designed and manufactured in Czech Republic. Spare parts are in stock.
Technical specification:
|
|
|
|
|
|
|
|
RECOMMENDED SERVOS FOR |
4,8V |
7,4V |
| AILERONS 2X | HS-225 MG (Hitec) | SV-1250MG+ HiVOLT (Savox) |
| FLAPS 2x | HS-225 MG (Hitec) | SV-1250MG+ HiVOLT (Savox) |
| ELEVATOR 1x | HS-225 MG (Hitec) | SV-1250MG+ HiVOLT (Savox) |
| RUDDER 1x | HS-485 HB (Hitec) | HS-5495 BH (Hitec) |
| AIRBRAKES 2x | HS-82 MG (Hitec) | HS-5087 MH (Hitec) |
| TOW HOOK 1x (if the model is equipped with it) | HS-645 MG (Hitec) | D645MW (Hitec) |
| RETRACT GEAR 1x (if the model is equipped with it) | HS-645 MG (Hitec) | D625MW (Hitec) |
Suitable setup for take off from the take-off dolly:
|
 |
The kit contents:
- Ready fiberglass fuselage
- Ready foam core abachi wings with carbon-fibre reinforcing covered with iron-on film with metallic airbrakes already installed.
- Ready foam core balsa horizontal stabiliser covered with iron-on film.
- Fiberglass hollow moulded fin
- Fiberglass cabin frame
- Transparent cabin
- Manual
- Accessories
Equipments required
 | 02074-POTEXT Název zboží: Transport bags for Swift S1 3140 mm Price: 274,00€  Delivery status: in stock The transport bag is made of several layers of high quality material. It is suitable for transporting and storing expensive models. Package Contents: Wing cover, fuselage, elevator, wing joiner. |
 | JSP-75-O Název zboží: SPIN 75 PRO OPTO Price: 156,30€ Delivery status: in stock Opto controllers have galvanically separated input (the receiver signal) from power accumulators, therefore it's necessary to use independent power supply for the receiver and servos (4-5 NiXX or 2-3 LiXX with linear voltage regulator, such as MAX BEC). |
 | 3707 Název zboží: Xmotor XM5060EA-10 V3 Price: 131,88€ Delivery status: in stock Outrunner brushless electric motor. Ø49.5mm x 58.2mm, RPM 490/1V, weight 392g, Max. 95A (15S), input voltage Lixx 5-6s, shaft 6 mm. |
 | 020D03 Název zboží: Sailplane Take-off Dolly III (height adjustable 313 - 418mm) Price: 113,00€ Delivery status: in stock Kit of Sailplane Take-off Dolly for models with a fuselage width up to 207 mm. Adjustable height 313-418mm and large wheels Ø215mm. Made of high-quality 5mm plywood. |
 | 020116390 Název zboží: Sailplane retract gear ø 90mm Price: 104,00€ Delivery status: in stock For model on a scale 1:4 and to weight 6 kg. |
 | 020D01 Název zboží: Sailplane Take-off Dolly I Price: 82,00€ Delivery status: in stock Kit of Sailplane Take-off Dolly for models with a fuselage width up to 219 mm. |
 | 02074-PO Název zboží: Transport bags for Swift S1 3140 mm Price: 79,00€ Delivery status: in stock Bags for wings, elevator and rudder. |
 | 02074SPB Název zboží: Polystyrene 1:3,5 sailplane pilot Peter (brown) Price: 69,00€ Delivery status: in stock 1:3,5 scale sailplane pilot doll. Hand painted. Designed for Swift S1. Weight: 45g. |
 | 02074SPR Název zboží: Polystyrene 1:3,5 sailplane pilot Peter (red) Price: 69,00€ Delivery status: in stock 1:3,5 scale sailplane pilot doll. Hand painted. Designed for Swift S1. Weight: 45g. |
 | SAVOX-SV1250MG Název zboží: SV-1250MG+ HiVOLT digitální servo (10kg-0,085s/60°) Price: 62,46€ (recommended quantity: 5 pieces) Delivery status: contact us Digitální Hi-Volt mini servo s coreless (bezjádrovým) motorem a kovovými převody, 2x kuličkové ložisko, 4,6/8.0kg při 6,0/7,4V a 0,11/0,095s na 6,0/7,4V, váha 29,6g, 35,0x15x29,2mm. Provozní napětí 4,8 - 8,4V. Notice: 7,4V for: 2x aileron, 2x flap, 1x elevator |
 | 020SERVISEG Název zboží: Construction Service (Installation of EG tow hook in Discus, Ventus, Swift and Fox fuselages) Price: 49,90€ Delivery status: in stock The price includes the towing hook (item no. 020201EG) and gluing to the fuselage, see picture. Also included is a tow hook servo tray (item no. 20201EG.ST). We recommend this service if the model is equipped with a motor, but you would like to keep the possibility of getting the model into the air by towing. Notice: for the combination of motor and tow hook |
 | 02074s Název zboží: Seat Swift Price: 49,00€ Delivery status: in stock fiberglass gelcoated |
 | 1HI38801 Název zboží: D625MW rychlé a silné digi servo (10kg) Price: 43,71€ Delivery status: in stock Rychlé digi servo s kovovými převody nové generace s elektronikou s bleskurychlou odezvou pro všeobecné použití. Programovatelné, napájení 4,8-7,4V. Tah 6,3kg.cm, rychlost 0,20s/60°při 4,8V, tah 10kg.cm, rychlost 0,13s/60° při 7,4V. Náhrada HS-5625MG a HS-5665MH. Notice: 7,4V for: 1x rudder |
 | 1HI38802 Název zboží: Servo D645MW silné digi servo 13kg Price: 43,71€ Delivery status: in stock Notice: 7,4V for: 1x tow hook |
 | 1HI3181 Název zboží: HS-5087 MH HiVolt DIGITAL Price: 41,63€ (recommended quantity: 2 pieces) Delivery status: in stock Silné digitální mikroservo 22g s kovovými převody a zvýšeným napájecím napětím (až 2S LiPo) pro elektrolety a větroně. 1xBB, tah 4,3 kg/cm, rychlost 0,13s/60st při 7,4V. Programovatelné. Notice: 7,4V for: 2x airbrakes |
 | 020SERVISSWIFT Název zboží: Construction Service (Cutting the nose of the Swift S1 fuselage for 50mm spinner including gluing the motor mount) Price: 37,80€ Delivery status: in stock The used motor mount is intended for the recommended Dualsky 5060 motor. If you are interested in gluing the motor mount for another motor, please contact us. |
 | 1HI3120 Název zboží: HS-645 MG bulk Price: 37,46€ (recommended quantity: 2 pieces) Delivery status: in stock 50 g standard servo with metal gears with increased Torque for larger models, cars 1:8. 2xBB, thrust 7.7 kg / cm, Speed 0.24 to 4.8 V. s/60st Notice: 4,8V for: 1x retract landing gear, 1x tow hook |
 | 02074PD1DEL Název zboží: Panel instrument Swift Deluxe Price: 37,00€ Delivery status: in stock Assembled and fully equipped with board instruments. main panel instrument |
 | 1HI3060 Název zboží: HS-225 MG Price: 33,29€ (recommended quantity: 5 pieces) Delivery status: in stock Strong miniservo 27g with metal gears for all-around use. 1xBB, torque 3,9 kg/cm, speed 0,14s/60st in 4,8 V. Notice: 4,8V for: 2x ailerons, 2x flaps, 1x elevator |
 | 1HI3194 Název zboží: HS-5495 BH digital Price: 29,13€ Delivery status: in stock Standard digital servo with 44.5 g karbonite gears, Torque 6.4 / 7.5 kg / cm and a speed of 0.17 / 0.15 s/60st. or at 6V. 7.4 V. Servo belongs to the series HiVolt and can be powered with 2 of Article LiPo (7.4 V). Notice: 7,4V for: 1x retract gear |
 | 02074-CB Název zboží: Cabling for Swift S1 3,14m wings TOPMODEL CZ Price: 29,10€ Delivery status: in stock |
 | 1HI3085 Název zboží: HS-485 HB Price: 24,96€ Delivery status: in stock Standard servo with 45 g Carbon gears for general use. 1xBB, Torque 4.8 kg / cm, Speed 0.22 to 4.8 V. s/60st Notice: 4,8V for: 1x rudder |
 | 1HI3041 Název zboží: HS-82 MG Bulk Price: 24,96€ (recommended quantity: 2 pieces) Delivery status: in stock Unpacked fast microservo 19g with metal gears for small electric planes and sailplanes. Torque 2,6 kg/cm, speed 0,11s/60st in 4,8 V Notice: 4,8V for: 2x airbrakes |
 | 02050068SC Název zboží: Alu precision spinner TURBO SC 50/6,0/8 Price: 21,90€ Delivery status: in stock Alu precision spinner TURBO for folding props. Spinner Ø50mm, collet 6,0mm, 3 mm propeller plug, for blade root width 8 mm. Short version of the SCALE spinner, for a more scale look . |
 | 02074PD2DEL Název zboží: Panel instrument Swift Deluxe Price: 17,00€ Delivery status: in stock Assembled and fully equipped with board instruments. panel instrument - 2.part |
 | 02074-ON Název zboží: Protective sleeve for Swift S1 3,14m canopy Price: 14,40€ Delivery status: in stock Protective sleeve to prevent scratching during storing and transporting the model. |
 | 020201EG Název zboží: Tow hook EG Price: 13,90€ Delivery status: in stock For FES (Front Electric Sustainer) model version . Dimensions: 50x20x8mm, pushrod Ø3mm. Notice: for the combination of motor and tow hook |
 | 723971 Název zboží: CAM CARBON 15x8" Z, 38x20cm Price: 10,80€ Delivery status: in stock the width of the root 8mm for M3 screw, to 9.000 rev / min Notice: for: LiPol 6S / Xmotor XM5060EA-10 V3 |
 | 05013 Název zboží: Remote tow hook for up to wingspan 4,5 m Price: 6,80€ Delivery status: in stock Made in aluminium. To be glued inside the nose of the gliders (like the real one). A hook connected to the servo rotates in a slot, and in doing so, "capture" the towing cable.for gliders up to wingspan 4,5 m, Ø10mm, length 48mm |
 | UHU5146 Název zboží: UHU-Por 50ml Price: 4,54€ Delivery status: in stock Notice: for gluing the servo covers |
 | 020201EG.ST Název zboží: Servo tray for EG tow hook Price: 4,25€ Delivery status: in stock For standard servo. Suitable for EG tow hook for Discus 2a, Discus 2c, Ventus 2cx, Swift S1 3.73m, Swift 3.14m. Notice: for tow hook EG |
 | 02074-DOOR-PLATERED Název zboží: Plate for the production of Swift S1 retract gear door (red) Recommended price: 7,80 (-50% discount) Price: 3,90€ Delivery status: in stock Material: white gelcoated fiberglass. Engraving size: 48x121mm, total size approx. 90x170mm. |
 | 02074-DOOR-PLATEWHITE Název zboží: Plate for the production of Swift S1 retract gear door (white) Recommended price: 7,80 (-50% discount) Price: 3,90€ Delivery status: in stock Material: white gelcoated fiberglass. Engraving size: 48x121mm, total size approx. 90x170mm. |
 | 02074-DOOR-PLATEYELLOW Název zboží: Plate for the production of Swift S1 retract gear door (yellow) Recommended price: 7,80 (-50% discount) Price: 3,90€ Delivery status: in stock Material: white gelcoated fiberglass. Engraving size: 48x121mm, total size approx. 90x170mm. |
 | 020CH50ML Název zboží: Pattex Chemoprén Extrém 50ml Price: 3,12€ Delivery status: in stock For contact bonding with very high strength. Especially for bonding leather, wood, rubber, textiles, metal, plywood, cardboard and various materials from hard plastics. Notice: for gluing cabin to the frame |
 | N3047 Název zboží: Wheel Ø47 Price: 2,90€ Delivery status: in stock Ø47 x 18mm, díra Ø5 mm Cena za kus. Balení obsahuje redukční pouzdra ø3 a ø4. Notice: tail wheel |
 | 02074-DSP Název zboží: Spring for closing the retract gear door Swift S1 2pcs Price: 2,24€ Delivery status: in stock Tension spring terminated by eyelets. Material: wire Ø0,5mm. Dimensions Ø5x36mm. Package content: 2pcs. |
 | 0167823-0,25 Název zboží: Velcro fastener width 5cm; length 25cm Price: 1,80€ Delivery status: in stock self-adhesive Velcro with high-quality acrylic glue, both parts. Price per 25cm. Notice: for fixing the battery, receiver, etc. |
 | 181840 CAN9 Název zboží: Connector CAN 9 Price: 1,50€ (recommended quantity: 2 pieces) Delivery status: in stock Two-Row connector, 9 PIN. Connector suitable for wiring of servos in the wing and fuselage. By using this connector is not necessary for each assembly / disassembly wing separate cables to connect the servos to the receiver. Price for 1 pair. |
 | 0123456789 Název zboží: digit sticker Price: 1,40€ Delivery status: in stock Suitable for describing servoconnectors. Digit height is 5mm. |
 | 0123456789BW Název zboží: Digits (stickers) for labeling the connectors (Black/white) Price: 1,40€ Delivery status: in stock Suitable for describing the servo connectors. Height of digits 5 mm. |
 | 0123456789RW Název zboží: Digits (stickers) for labeling the connectors (Red/white) Price: 1,40€ Delivery status: in stock Suitable for describing the servo connectors. Height of digits 5 mm. |
 | 020CGSTICK Název zboží: Center of gravity mark (sticker) Price: 1,20€ Delivery status: in stock 6pcs. Ø14mm, 8Pcs. Ø10mm. |
 | 8GR3009 Název zboží: Servo Cable Twisted Thick JR 0.25mm2 Recommended price: 1,21 (-11% discount) Price: 1,08€ (recommended quantity: 4 pieces) Delivery status: in stock Twisted three-core cable in JR colors (brown / red / orange) with PVC insulation, conductor cross-section 0.25 mm2. Highly flexible, strands of 65 strands 0.07 mm, max. 48 V, 5A. Diameter 1.5 / 2.9 mm. Made in Germany. Weight 13g/1m. Price for 1 meter. Notice: ~3,8m |
 | 9001 Název zboží: Thermo-Shrinkable insulation Ø1,6mm (1m) Price: 0,30€ Delivery status: in stock For isolation of soldered joints of thin cables Ø1,6mm Price per 1 m. Notice: ~0,6m |
Spare parts
 | 02074-2DLJ Název zboží: Swift S1 3,14 m ARF DE-LUXE ARF Wings (JEPPESEN) Price: 578,20€ Delivery status: in stock Wngs with metallic airbrakes installed. Wing fixing device already installed and servos connector also. .Stickers are sticked on wings. Covered with iron-on film |
| 02074-2JARF Název zboží: Swift S1 3,14 m ARF STANDARD ARF Wings (JEPPESEN) Price: 536,50€ Delivery status: in stock Wingspan 3,14m. Wings with metallic airbrakes installed. Covered with iron-on film |
 | 02074J-1DL Název zboží: Fuselage Swift S1 3,14m Deluxe (JEPPESEN) Price: 479,00€ Delivery status: in stock Completely fitted fuselage (equipped with canopy+frame, towing hook, retractable landing gear, connectors with cables, seat, 2x dashboard with instruments, rudder). Covered with stickers. White fiberglass, length 1740 mm. |
 | 02074-1 Název zboží: Fuselage SWIFT 3,14m Price: 283,00€ Delivery status: in stock fiberglass white gelcoated, length 1740 mm |
 | 02074-6DLJ Název zboží: Canopy Swift S1 3,14m Jeppesen De luxe Price: 149,00€ Delivery status: in stock Complete canopy glued to the frame including dash-board panel. Material: Vivak® 1mm, transparent. |
 | 02074-3ARF Název zboží: Swift 3,14m elevator ARF Price: 114,00€ Delivery status: in stock Ready foam core abachi horizontal stabiliser. Length 810mm. |
 | 02074-3ARC Název zboží: Swift 3,14m elevator (uncovered - ready to cover) Price: 92,00€ Delivery status: in stock Ready foam core abachi horizontal stabiliser. Length 810mm. |
 | 02074-24C Název zboží: Swift 3,14m Wing joiner Carbon Price: 69,00€ Delivery status: in stock Ø 16mm; length 540mm; weight 140g. |
| 02074-4 Název zboží: Swift S1 3,14m rudder Price: 62,00€ Delivery status: in stock fiberglass |
 | 0203016 Název zboží: Airbrakes 300mm (1 pair) Price: 53,00€ Delivery status: in stock Aerodynamic brakes for model up to 4,5 m wingspan. 1 pair |
 | 02074J-7 Název zboží: Swift s1 3,14 JEPPESEN Stickers Price: 49,50€ Delivery status: in stock |
 | 02074-6 Název zboží: Canopy Swift S1 3,14m Price: 34,00€ Delivery status: in stock Material: Vivak® 1mm, transparent. |
 | 02074-6FIB Název zboží: Canopy Swift S1 3,14m fiberglass Price: 34,00€ Delivery status: in stock |
 | 02074-5 Název zboží: Canopy frame Swift 3,14m Price: 29,00€ Delivery status: in stock fiberglass |
 | 02074-6-01 Název zboží: Swift S1 Canopy hinge Price: 12,00€ Delivery status: in stock |
 | 02074-6II Název zboží: Canopy Swift S1 3,14m II.QUALITY Recommended price: 34,00 (-71% discount) Price: 9,99€ Delivery status: in stock Material: Vivak® 1mm, transparent. II.QUALITY |
 | 02074-DOOR Název zboží: Doors for sailplane retract gear Swift 3,14m Price: 9,90€ Delivery status: in stock pare doors for sailplane retract gear. |
 | 02074-23 Název zboží: Wing tip Swift S1 3,14m Price: 9,00€ Delivery status: in stock fiberglass |
 | 02074-1-21.2.22.23.24 Název zboží: Držáky serv Swift S1 3,14m Price: 7,00€ Delivery status: in stock držák serv výškovky, směrovky, vlečného háčku a podvozku |
 | 0203016.2 Název zboží: Cover plates for 300mm airbrakes (2pcs) Price: 6,50€ Delivery status: in stock Fiberglass cover plates for 300mm airbrakes. Unpainted. Set contains 2 pcs. Dimensions: 9,5 x 309 x 1 mm |
 | 02074-1CD Název zboží: Motor mount ø 52/4mm + ø 52/3mm Swift S1 for Dualsky 2 pieces Price: 6,20€ Delivery status: in stock CNC cut fiberglass. Contains 2 pieces: 1 piece 52x4 mm, 1 piece 52x3 mm (spacer pad). Intended for Dualsky 5060 motor. |
 | 03800 Název zboží: Clip fixing 2 pairs Price: 3,50€ Delivery status: in stock for wing fixing, plastic, 2 pairs. 2 pair ( 2 pcs into fuselage + 2 pcs into wing + 1x disconnect wedge for wings) |
 | 02074-6-02 Název zboží: Hatch latch Swift S1 Price: 3,20€ Delivery status: in stock Length 30mm, shaft Ø2mm. |
 | 05027 Název zboží: Wing servo mounts 18 mm (2 pairs) Price: 3,00€ Delivery status: in stock Polyurethan 18 mm, delivered in double pairs. Notice: for servos ailerons and flaps |
 | 05018 Název zboží: Plastic servo covers Price: 2,15€ Delivery status: in stock For mini servo, ø 65 mm. Notice: for ailerons and flaps |
 | 2290 BR Název zboží: Brass control horn M3 short 2 pcs Price: 1,44€ Delivery status: in stock Very small, aerodynamic clear, brass control horn for metal or plastic clevises (MPJ 2110, 2140). Content of package: 2 pcs Notice: for rudder |
 | 02074-2-8 Název zboží: Fiberglass control horn Swift S1 (for ailerons and flaps) Price: 1,30€ Delivery status: in stock Fiberglass 2mm Notice: for ailerons anf flaps |
 | 02074-3-8 Název zboží: Fiberglass control horn Swift S1 (for elevator) Price: 1,30€ Delivery status: in stock Fiberglass 1,5mm Notice: for elevator |
 | 02074-1-24 Název zboží: Tow hook servo tray Swift S1 Price: 1,30€ Delivery status: in stock |
 | 519.1,5.1250 Název zboží: Steel wire 1.5mm, 1250mm Price: 1,10€ Delivery status: in stock Spring steel wire suitable for landing gears, wing joiners, shafts, struts, tailwheel systems, etc. Notice: rudder pushrod |
 | 020CAN-01 Název zboží: Spacer pad for CAN9 and CAN15 connector Price: 0,70€ Delivery status: in stock |
 | terc60 Název zboží: target Ø60mm stickers Price: 0,25€ Delivery status: in stock Notice: airbake servo top |
Tuning parts
 | 020SFHI225 Název zboží: Servo frame for Hitec HS-225 Price: 4,20€ (recommended quantity: 4 pieces) Delivery status: in stock Ø 50mm; width: 19mm; 3d printing. Notice: 4x for ailerons |
 | 020SFHI82 Název zboží: Servo frame for Hitec HS-82, HS-81 Price: 4,00€ (recommended quantity: 2 pieces) Delivery status: in stock Ø 50mm; width: 15mm; 3d printing. Notice: 2x for airbrake |