|
|
All Hyperion Atlas servos are fully programmable to define a range of important and useful features that will help you optimize your radio installation.
A total of 140 degrees available, plus 25% programmable by transmitter, means that as much as 175 degrees of throw can be obtained. So these servos not only guarantee as much control throw as you will ever need, but are also perfect for retract and scale hatch installations. Speed is adjustable from 1% to 100%, and 1% is VERY slow indeed!
No expensive programming box is needed to access all these useful features - it is a simple cable you attach to your PC.
HP-DH20x-SCD | HP-DH20x-GCD | |
---|---|---|
Servo type | High Voltage, Coreless, fully programmable full size digital servo | |
Dimensions mm | 40.0 x 19.5 x 36.5 | |
Weight gram | 51.5 | 52.5 |
Speed (sec/60 deg @ 6.0/7.4V) | 0.14/0.11 | 0.07/0.06 |
Dynamic torque (kg/cm @ 6.0/7.4V) | 6.0/7.5 | 4.0/4.5 |
Holding torque (kg/cm @ 6.0/7.4V) | 12.0/15.0 | 8.0/9.0 |
Gear Train primary material | Carbon Poly | |
Bearing | Double ball | |
Programmable | Yes, with free PC software connected via USB adapter (HP-AT-PRGUSB) | |
Rotation in degrees | Adjustable 30 to 140 degrees total, 90 degree default (45 each way) | |
Adjustable travel speed | Yes, 1% to 100% of Rated Speed (100% default) | |
Maximum input voltage | Loaded or unloaded input voltage should never exceed 8.4V |
Abbreviations:
S - high torque, moderate speed
C - carbon poly
D - double ball bearing
Programming via aplikacation (EXE) or Emeter 2.
Adapter PRG-USB must be used to connect servo to your PC.
Programmable parameters:
- range of arm angle 10-70 deg (default 45 deg.)
- reversible
- speed 1% to 100% (default 100%)
- center adjustment
- sensitivity setup
- compatibility with various Tx