|
|
Description
- Hardened stell shaft, diameter 3,2 mm.
- Two precise ball bearings
- Dynamically balanced
- Neodym magnet rotor
- Handmade stator, lightweight rotor allows high revolution.
- Kevlar bandage rotor
- Motor mount has two M3 threads for two M3 screws
- Efficiency up to 88%
- Recommended gearbox: MEGA GEAR 16
- Size and weight of these motors are the same as brushed motors of product line MIG 400. They have much better efficiency, power, max. revolutions and long lifetime.
- Motors are also suitable for 50 - 70 mm diameter ducted fan.
- Recommended number of cells: 6, 7 or 8 cells NiCd, NiMH.
- recommended controller : 18A
- current at max. efficiency : 3 - 12 A
Technical data :
Recommended power supply: 4-16 Ni or 2-5 Lixx
Dimensions: ø 28 mm, length 36,4 mm, ø shaft 3,2 mm
Weight: 76 g
RPM/1V: 1225
Max. current: 16 A
Slope resistance: 65 mΩ
No. winds: 7
- Motor (aerobatic) models up to 1kg (0,8 kg) with 7-8 cells NiCd (NiMH) or 2 cells Li-POL, Li-ION, recommended propeller for 7 and 8 cells is from 6x4“ to 8,5x5“ Aeronaut Glas, Graupner.
- Electric glider - 7-8 cells NiCd (NiMH) or 2 cells Li-ION, Li-POL up to 1,2 kg, recommended propeller for 7 and 8 cells 8,5x4“ Graupner CAM folding.
- Bigger models of PARK FLYERs, recommended propeller 9x4,7“, 10x4,7" APC, 5, 6, 7, 8 cells NiCd, NiMH or 2 cells Li-ION, Li–POL.
- 3D flying for models up to 450 g: recommended propeller 9x4,7“, 10x4,7" APC. Best result can be obtained with 2 cells Li–POL, or 7 NiCd, NiMH cells with recommended propeller 10x4,7" APC for models with flying weight up to 450 g. In such case current consumption is not higher than 12A.